|
Tools and accessories you
will need
Tools
Knee pads
Buff tape
Carpenter
pencils
Angle
square
Tape
measure
Cleaning
cloth
Accessories
Underlay
Profiles
for finishing - e.g. transition, reducer, end rod,
stair-nosing, riser cover, etc
Skirting
and/or quarter round
Installation kit and spacers
Parquet
Sealants for finishing (matching colour - see chart)
Adhesive
and silicone for finishing
Floor
protectors for furniture
Laminate
floor mop & replacement cover
Cleaners -
Elf Stain remover and Elf Daily cleaner
Ask your Elf consultant about
installation & delivery services.
Its so easy to do-it-yourself
Follow the steps from 1 - 13 and install your Elf flooring in no
time at all. Clean, no nails or messy adhesives. Just a quick
click together and you're able to take a walk on it immediately.
What could be easier?
 |
 |
 |
|
1. Check level & evenness of sub-floor |
2. Ensure sub-floor is completely dry
before installation |
3. Clean sub-floor thoroughly before installation |
 |
 |
 |
|
4. If your sub-floor is carpeted, remove
carpet completely |
5. Acclimatize your new Elf floor boards
inside the room at least 48 hours to
installation |
6A. Floor boards cannot be cut and
installed at a width of less than 50mm |
 |
 |
 |
|
6B. Floor boards cannot be cut & installed
at a length less than 200mm |
7. Underlay should overlap by 20mm prior
to floorboard installation |
8. Tongue & Groove mechanisms |
 |
 |
 |
|
9. Position the first floor board with
the tongue facing the wall |
10. Keep a 12 – 15mm spacing from the
walls whilst installing floor boards.
Complete first row. |
11. Complete second row |
 |
 |
|
|
12. |
13. Click entire row into place with one
motion. Repeat until finished. |
|
|
